How to Choose the Right Pixel Pitch for Your LED Screen

Indoor LED video wall in a retail space – Grecko

Pixel pitch is the single most important number on an LED screen spec sheet. It decides how sharp the image looks, how close your audience can stand, and a large part of the final price. This guide explains what pixel pitch is, how to pick the right one for your project, and the mistakes buyers make most often.

What is pixel pitch?

Pixel pitch is the distance, in millimeters, from the center of one LED pixel to the center of the next one. A P3 screen has pixels 3 mm apart; a P10 screen has pixels 10 mm apart. The smaller the number, the more pixels fit in each square meter, and the sharper the image looks up close.

Pixel density grows fast as pitch gets smaller. A square meter of P10 has about 10,000 pixels. The same square meter at P5 has about 40,000, and at P2.5 about 160,000. That is why fine-pitch screens cost more per square meter: you are paying for many more LEDs and driver chips.

The simple rule: viewing distance

The easiest way to choose is to start from where your audience will be. A common industry rule of thumb is:

Minimum comfortable viewing distance (meters) ≈ pixel pitch (mm).

So a P3 screen looks smooth from about 3 meters away, and a P10 screen from about 10 meters. Closer than that, viewers start to see individual pixels. Many integrators also use an “optimal” distance of two to three times that number for the best experience.

Closest viewer Typical pitch Common uses
Under 2 m P1.2 – P1.9 TV studios, virtual production, control rooms, boardrooms
2 – 4 m P2.5 – P3.9 Retail stores, churches, lobbies, stages, rental events
4 – 8 m P4 – P6 Storefronts, street-level advertising, larger stages, sports venues
Over 8 m P8 – P10 Highway billboards, building facades, stadium perimeters

Screen size and resolution

Pitch also sets how much resolution you get for a given screen size. A 4 × 2.25 m screen at P2.5 gives about 1600 × 900 pixels, close to HD. The same size at P5 gives only 800 × 450. If you plan to show detailed content such as small text, spreadsheets or presentations, check that the final resolution is enough for it. For video and large graphics, lower resolutions work well at the right distance.

Indoor and outdoor need different pitches

Indoor audiences are usually closer, so indoor screens use finer pitches (roughly P1.2 to P4). Outdoor screens are seen from farther away and need much higher brightness and weather protection, so they usually use P3 to P10. Outdoor cabinets are also built differently, with sealed modules and higher IP ratings. Read our guide on indoor vs outdoor LED screens before deciding.

Five common mistakes

  1. Buying finer than you need. If nobody stands closer than 6 meters, a P2.5 screen costs much more without a visible benefit.
  2. Ignoring the closest viewer. Plan for the people nearest to the screen, not the average.
  3. Forgetting the camera. If the screen will be filmed, refresh rate and pitch both matter to avoid moiré and flicker.
  4. Checking pitch but not brightness. An outdoor screen with the right pitch but low brightness will look washed out in the sun.
  5. Not matching content to resolution. Design your content at the screen’s native resolution.

How to choose with Grecko

Grecko LED offers indoor screens, outdoor billboards, rental panels for events and fine-pitch walls for TV studios. Tell us where the screen goes, how far away the audience is and what you plan to show, and our team will recommend the right pitch and screen size. Request a quote or browse the product range.

Get a quote